DMG TWIN 65 Rg1 strug za metal
Kaiserslautern
Ako odlučite da kupite opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavcem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava kompanija. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite da izvršite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavca da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati da pojasnite pojedinosti, zatražite dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavci mogu zatražiti određeni iznos kapare kako bi "rezervisali" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sa prikupe veliki iznos i nestanu, i više se ne pojave.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tokom komuniciranja prodavac postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba da bude alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun kompanije sa sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih kompanija, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Utskiftning av egne detaljer på fakturaen til et ekte selskap
- Bør du utfører overføringen, sjekk at de spesifiserte detaljene er riktige, og hvorvidt de faktisk hører til det spesifiserte selskapet.
Kontakti prodavca
+49 162 40...
Prikaži
+49 162 4027581
Njemačka, Pullach
Configuration/features:2 cross slides2 star turrets, 12 stations each, with live toolingMain and counter spindles2 tool drives2 C-axes and 1 Y-axis
2 cross slides
2 star turrets, 12 stations each, with live tooling
Main and counter spindles
2 tool drives
2 C-axes and 1 Y-axis
Left spindle (main):Chuck diameter: 150 mmSpindle flange: 140 h5 mmSpindle bore: 79 mmFront bearing diameter: 165 mmPower: 15 kW (100% ED) / 20 kW (40% ED)Torque: 120 Nm (100% ED) / 160 Nm (40% ED)Speed range: 25–5600 rpm
Chuck diameter: 150 mm
Spindle flange: 140 h5 mm
Spindle bore: 79 mm
Front bearing diameter: 165 mm
Power: 15 kW (100% ED) / 20 kW (40% ED)
Torque: 120 Nm (100% ED) / 160 Nm (40% ED)
Speed range: 25–5600 rpm
Right spindle (counter/sub):Chuck diameter: 150 mmSpindle flange: 140 h5 mmSpindle bore: 79 mmFront bearing diameter: 165 mmTorque: 120 Nm (100% ED) / 160 Nm (40% ED)
Chuck diameter: 150 mm
Spindle flange: 140 h5 mm
Spindle bore: 79 mm
Front bearing diameter: 165 mm
Torque: 120 Nm (100% ED) / 160 Nm (40% ED)
Axes/travels:Slide 1: X 220 mm, Z 320 mm, Y ±30 mmSlide 2: X 120 mm, Z 345 mmSlide 3: Travel 145 mm
Slide 1: X 220 mm, Z 320 mm, Y ±30 mm
Slide 2: X 120 mm, Z 345 mm
Slide 3: Travel 145 mm
Turrets/tooling:Turret 1: 12 stations, VDI 25 (DIN 69880), live tooling up to 6000 rpm, 3.8 kW (40% ED)Turret 2: 12 stations, VDI 25 (DIN 69880), live tooling up to 6000 rpm, 3.8 kW (40% ED)
Turret 1: 12 stations, VDI 25 (DIN 69880), live tooling up to 6000 rpm, 3.8 kW (40% ED)
Turret 2: 12 stations, VDI 25 (DIN 69880), live tooling up to 6000 rpm, 3.8 kW (40% ED)
Equipment/options on machine:Differential clamping for main spindleDifferential clamping for counter spindle
Differential clamping for main spindle
Differential clamping for counter spindle
Paint/enclosure (Gildemeister standard):Machine enclosure and work area door: Calcite white (RAL 9010)Chip conveyor: Titanium gray (RAL 7016)Chip conveyor hood: Calcite white (RAL 9010)Machine base and control cabinet: Titanium gray (RAL 7016)
Machine enclosure and work area door: Calcite white (RAL 9010)
Chip conveyor: Titanium gray (RAL 7016)
Chip conveyor hood: Calcite white (RAL 9010)
Machine base and control cabinet: Titanium gray (RAL 7016)
Additional equipment
Chip conveyor (with hood)
Bar processing package RG 1:Workpiece pick-up device with NC-controlled carriageHydraulically operated gripper arm, pneumatically operated gripper1 set of gripper jaws (blanks)Conveyor beltCapacity: Ø 6–65 mm, length approx. 300 mm; max. 3.5 kg (4.5 kg for TWIN 65)
Workpiece pick-up device with NC-controlled carriage
Hydraulically operated gripper arm, pneumatically operated gripper
1 set of gripper jaws (blanks)
Conveyor belt
Capacity: Ø 6–65 mm, length approx. 300 mm; max. 3.5 kg (4.5 kg for TWIN 65)
Preparation/connection for bar feeder or bar feeder magazine
Coolant spray gun
DMG indicator light, 4-way (stack light)
Electrical/mechanical connection for oil mist separator
Automatic sliding hood operation
EDS pressure switch for clamping device
DMG Netservice (on-board)
“Green light for your machine” pre-installed on the control unit (status/indicator)
application type: Turning
Location: Austria
machine type: Horizontal Turning Machine
control unit brand: SIEMENS
Control Brand: SIEMENS
Control Model: Sinumerik 840D
Machine Depth: 2810 mm
Number of Axes: 6
Spindle Power: 20 kW